Blown Head Gasket April 29, 2009

 

I was driving to a bowling alley one day when it suddenly started running very rough and with about half as much power as normal. I had to keep my foot on the gas just to keep it running. I first suspected a fuel problem because I'd done some engine work only 2 years before. After fiddling with the fuel pump and failing to change anything, I called the MGAguru Barney Gaylord. With his help I managed to get it started and limped home. We took the head off and found the culprit. The head gasket blew between cylinders 2 and 3. I replaced the head gasket and took the head to Apex Automotive Engineering in Bensenville Illinois to be resurfaced, to have bronze guides installed, and to enlarge the inlet valves to the next size up.
Two weeks after repairs were finished and the gasket blew again. Turns out that the block was low between cylinders 2 and 3 and needed to be skimmed. A total rebuild was in order! On disassembly it was discovered that the cam was shot, the timing chain was stretched, and the main bearings were worn. The new cam I chose was the Swiftune SW5-07 purchased through Seven Enterprises LTD. I got the tappets and oil pump from Seven, the gaskets, timing chain, main bearings and other parts from Moss Motors. The block went to Apex for skimming and reboring to .0.030 over ( the least amount of material they could do because I was a bit over enthusiastic with a ridge reamer some years ago).

I got engine paint from Moss, but used PN 220-550 because it was closer to the original color paint that remained before I repainted it the first time with 220-580 (which was too dark for the 12CJ engine).

Turns out that the cam needs a 3º offset key (PN 327-015) to retard the cam 6º-7º (this is because the cam rotates 1/2 as much as the crank). After it was reassembled and back in the car, it started right up and the engine has proved to be stronger and more powerful than ever. It pulls nicely, even low down from around 2500 up and I haven't revved it too much but it still develops power at 5000 rpm.

-Seth Jones