Solid State Control Boxes

 

The following two offsite hosted PDFs detail how to upgrade the Lucas RB106 control box found on all spridgets manufactured from may 1961 to October 1966. The idea is to replace the voltage and current regulator portion of this unit with a hall effect sensor and some other parts available from your local radio shack. The upgrades may work ok with the screw terminal control box found on Mk I Sprites since they appear to be identical apart from the style of terminal.
THELUCASDYNAMOFINAL.pdf
SAVING_THE_LUCAS_RB106.pdf

Doing the Hybrid Hall version requires making your own PCB board. This is possible to do at home and there are many websites that detail how to use a laser printer to create an etch resist transfer. I liked this one because it also tells you how to do a photoresist process (for those who find it easier to go to kinkos and get a transparency made).

http://www.siongboon.com/projects/2005-09-07_home_pcb_fabrication/

According to that website, the cost of setting up for PCB production at home is around $47.60 US. Given the size of Holden's PCB several could conceivably be made at once. The process does involve toxic chemicals, so be sure you can dispose of them safely before you even try it.

There are a few youtube videos that explain the process. javapda made this one

 

I have also heard rumors that the cost of prototyping a PCB is rather inexpensive. http://www.myropcb.com is just one company that can do this for you. I did enter the specs from Holden's site and it looks like they would charge you 62 bucks just to make 1. however if you buy a larger quantity, the cost per unit is greatly reduced. You can buy 10 for $12.73 each for example.

According to Dr. Holden who wrote the pdf articles, the end result is a unit that has much more stable output in terms of voltage and current without using as much power to run it as the original type. I will try to find a way to do something similar for the later Lucas RB340 unit.

So far,your options for the RB340 unit are
Wilton Auto Electric will do it for you for about 80 bucks when you send in your old unit but will charge about 80 bucks

Classic Dynamo Regulator Conversions are an english company that uses british built electronic voltage regulators that are made to fit inside the original box. They charge £125.