About a month after sending my old belts off to Ssnake-Oyl products in Texas, they returned in a box much larger than I had packed them into before. Heres how it arrived.


The two smaller parcels wrapped in bubble wrap were the finished seatbelt sets. The larger parcel was the unused and old parts left over after the work was done along with some extra british leyland stickers. The paper shown in the upper left picture is the invoice and the warranty information.

Lets open the large parcel first. I had shipped a collection of hardware and belt parts for them to pick from. They returned all the parts that were not up to snuff. However i had originally requested that they substitute the chrome adjustment slides for the plastic ones and they chose to use the black plastic ones instead. Still I can't complain too much because I had been somewhat conflicted about wether to go ahead with that modification. All it means is that it will exactly match what showed up in the vintage sales brochure I have. Also included in the large parcel were the extra labels and some info on their supplier for the stickers.

The old stickers I sent off with the belts were in ok shape but were dented and bent and worn. They returned them in with the rest of the unused parts.
![]() | ![]() |
As you can see, the original ones had a slightly darker shade of blue. These things can fade so it is possible that the sticker guy based them off a faded sticker. Other differences include the foil used to make them. The original had a smooth matte finish with blue tinted backing and the material was .005" thick. The replacement uses a brushed metal finish and the foil is only .004" thick and a lot more flexible.
But now on to the results for the belts themselves. . .


As advertised, the belts were put together with the original stitch patterns. As far as I can tell they are within 1.5" of the correct size (they came back slightly larger than stock) which is perfectly acceptable to me since many have passengers have sat in my car only to find that the seat belt wont fit over their frame (or sometimes their girth). Ssnake-Oyl doesn't have a source for the metal plate on the underside of the lift flap buckle so they were left in place as shipped to them, dented scratched and faded.
The metal plate in question reads as follows
Made by
Kangol Magnet
Carlisle Eng.
Brit. pat 942282 U.S. pat 3127650 Corres. pats.
in other countries and other pats. pending

I did check out www.classiccapsule.com and the website said that they make custom stickers as well. I asked them about the color difference and about the plates. A few days later I got the following email in response.
Sorry, we can't print on metal. The originals were screen printed in their 1000's. We digitally print them onto the closest vinyl material we can find to the original metal. The colour is a good match for the original we obtained, but some were in a darker colour as you quite rightly say. However, we only make that version.
For the plate, try Trevor at www.classicrepro.co.uk, he may be able to help you.
I'll try him next.
In conclusion, the process is expensive, but the result can be worth it. Be sure you collect the best possible hardware (buckles etc) as the unrestored condition greatly affects the finished result. They will need a belt to use as a pattern, but they can use parts that are in better shape when they make up you new belts. That said, I can't really recommend that anyone go this route unless they demand concourse quality.
TOP OF PAGE
