1967-1973 Factory Optional Door Mirror

 

One day I was looking through my sales brochure from 1971 when I saw this door mirror

It didn't look anything like what Moss Motors, Victoria British or anyone else was selling, so my curiosity was piqued. I simply had to find out what that was. By chance I happened to find a door at the swap meet here in Chicago one year that had such a mirror attached to it. The rubber grommet that goes between the base and the door was unsalvagable but the rest was there. I used a piece of an old bicycle tyre instead of the grommet when I installed it on my driver side door.

Initially I had assumed that this was not an ordinary TEX mirror (made of unobtanium) and that it was no longer in production. About a month after installing it, I smacked it into a 2x4 that had been reinforcing the garage door frame (I have since come to understand that this extra support isn't really needed), and I just left it that way for years. In preparation for the midget 50 I took it to a local glass shop where they cut a new mirror and glued it on top of the shattered remains of the old one. When i went to pick up the newly repaired mirror I inspected the mirror more closely. The back of the mirror head is stamped with an inscription that runs in a circle around the joint with the stem. It reads

Made in England TEX viewmaster pat. 746275 746366 746370 775594 782895 RD889769

I wasn't able to trace the patent numbers online (apparently the british government only has paper copies for these patent specification numbers). The BMC Parts List AKD 3514 states that fitment of this mirror began with HAN9-72034 (USA &Canada) and GAN4-60441 (USA), but wasn't fitted to Canadian market Midgets until GAN4-64756. That dates the start of it's use to about November 1967 and coincides the launch of a special North American model. At this time I don't have any info on when it was discontinued. The part number for the whole assembly was BHA 4735. British Leyland Parts List AKM 0036 (© 1976) states that this part was also availible in Sweeden and that availibility ended with the first 1974 model with GAN5-138800 in August 1973.

A google search of "tex viewmaster" yeilded fascinating results. The following pictures and information are all from www.texautomotive.com (TEX's current website)

The current TEX part number is apparently MO106F for flat mirror glass and MO106C for convex. The only major difference is that it is now supplied with a round based plinth that uses a single bolt whereas the one supplied to dealers (for the Midgets and Sprites in the States at least) used a longer rectangular plinth that used two bolts to hold it to the car. The rest may well be interchangable. The head and stem piece are available separately if needed (part numbers are as in pictures above). The round based plinth version might make a good offside wing mirror.