In 1996 British Motor Heritage started selling these very handy self adhesive backed templates for installing the MIDGET sill lettering. I emailed them and asked them if I could get a set. They responded that the template had been discontinued since they started producing patch panels and sills and bodyshells that were predrilled for the MIDGET letters. Since I plan on using a 1969 shell for my restoration someday (I have the shell waiting for bodywork and prep) I figured it would be great if I could have a good template for the job. There have been other attempts at creating one but i still think that the BMH template is the one to use (they sure look good). Fortunately I managed to find a generous member of the MG Experience forum named James "Andy" Meador (JAM) who had some extras and was willing to send me a set. David Savidge, the Systems Manager of British Motor Heritage Ltd. has given me permission to post these templates as a PDF on my website.
When I got it, I scanned it into my computer. I had to make two passes because the template was larger than my scanner bed. Anyway while I was using my image editor to stitch the two halves together, I noticed a small error.

This is not the result of the paper being skewed or some error with the scanner bed. I tool a look at the BMH templates and the same error was there too. Now granted the error is only 0.083" and won't likely be noticed by anyone since you cant really see both sills at the same time, and the error is so very small, but I mention it here since I plan on correcting this in the version I post here and to inform any that may come across one of these templates. I measured 4.484" from the leading edge of the panel to the front of the M on my car. I base my correction on that. Assuming that I measured correctly, it is the left hand template that is off.
Now I share it with you. It has been corrected as mentioned and should be ready to go. The instructions are included on the template and the only adjustment (since you will doubtless be printing it out) is to print it out on legal paper and to use some kind of spray adhesive. The image is 7.967"x 12.67". It is best to print from the PDF below, but you can certainly take a look at it first. I suppose it might also be used to help place the SPRITE badge.
