The following table was compiled from a variety of manuals and sources. It may prove useful to those who are planning to have a set of composite springs made up, or who wish to recurve their rear springs. If you want to know how to measure your springs, try using the following links.
| Production Period | Spring Rate | Free Camber (C) | # of Leaves |
|---|---|---|---|
| 05/58-02/64 | 97.8 lbs/in | (quarter eliptic) | 14 |
| 03/64-09/66 | 75 lbs/in | 4.437in | 5 |
| 10/66-09/74 | 80 lbs/in | 4.72in | 5 |
| 10/74-11/79 | 86 lbs/in | 5.58in | 6 |
The measurements below are in keeping with the spring measuring form linked to above. I measured as best I could with a digital caliper, and a tape measure. Also, see end type chart above. The goal is to have an accurate database of all the measurements for all four spring types so you can order springs from Eaton and other spring shops, and maybe even have custom ones made up (lowered=less camber) without having to take your old springs apart. In taking the following measurements I noticed that one of my old springs has slightly longer leaves than the other (not sure why). It is this one that I was able to dismantle and get measurements from (the digital calipers were in fraction mode). Interestingly enough, I counted 6 leaves even though the bentley manual and other sources say there should only be 5. I measured leaf thickness in fraction mode unaware of what std spring steel size is. I will remeasure and update in decimal as well
10/66-09/74 Production Date, Standard Spec
| Leaf # | Leaf Thicknes | "A+B" Length | "A" End Type | "A" Length | Clip "A" End | "B" End type | "B" Length | Clip "B" End | Width |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3/16" | 36 5/16" | A | 17 5/32" | N | A | 19 5/32" | N | 1.5" |
| 2 | 3/16" | 36 5/16" | D | 17 5/32" | Y | D | 19 5/32" | Y | 1.5" |
| 3 | 3/16" | 29 9/16" | D | 14 13/32" | Y | D | 15 5/32" | Y | 1.5" |
| 4 | 11/64" | 20 5/16" | D | 10 29/32" | Y | D | 9 13/32" | Y | 1.5" |
| 5 | 11/64" | 11 5/16" | D | 5 31/32" | Y | D | 5 11/32 | N | 1.5" |
| 6 | 5/32" | 4 15/64" | D | 1 61/64 | N | D | 2 9/32 | N | 1.5" |
| Centerbolt Size: 5/16" | Centerbolt Head Touching: Main Leaf |
| "A" End Specs | |
| Spring Eye Internal Diameter: .866" | Bushing Internal Diameter: 7/16" |
| Bushing Type: Steel Encased Rubber | |
| "B" End Specs | |
| Spring Eye Internal Diameter: .866" | Bushing Internal Diameter: 1/2" |
| Bushing Type: Rubber |