In the BL issued special tuning manual for 948cc engined cars, the cam data is limited. The one I have does not include duration and a few other specs that some may find useful. Admittedly there is some overlap with other special tuning manuals, but I feel it may be useful to have the data below when reading the 948cc manual. Especially since there is no table in that manual.
When the timing degrees in the BMC/BL manuals are listed sequentially separated by commas they mean the following. Intake valve opening degrees before top dead center (BTDC), intake valve closing degrees after bottom dead center (ABDC), exhaust valve opening degrees before bottom dead center (BBDC), and exhaust valve closing degrees after top dead center (ATDC). I found a website with a calculator designed to calculate the data. Below is a table of every camshaft listed by this manual with BL's specs, and the duration etc for those looking to use one of these cams or better understand this document.
The cams listed in the special tuning manuals are as follows
SPECIAL TUNING FOR THE MIDGET AND SPRITE
948 c.c. C-AKD 1D21C
| Camshaft Part# | 12A 1065 | 12G 726 | 88G 229 | C-AEA 731 | C-AEA 648 |
|---|---|---|---|---|---|
| Inlet Valve Opens | 5º BTDC | 5º BTDC | 16º BTDC | 24º BTDC | 50º BTDC |
| Inlet Valve Closes | 45º ABDC | 45º ABDC | 56º ABDC | 64º ABDC | 70º ABDC |
| Exhaust Valve Opens | 40º BBDC | 51º BBDC | 51º BBDC | 59º BBDC | 75º BBDC |
| Exhaust Valve Closes | 10º ATDC | 21º ATDC | 21º ATDC | 29º ATDC | 35º ATDC | Valve Lift | 0.280" | 0.312" | 0.312" | 0.320" | 0.394" | Valve Overlap | 15º | 26º | 37º | 53º | 85º | Intake Duration | 230º | 230º | 252º | 268º | 300º | Exhaust Duration | 230º | 252º | 252º | 268º | 290º | Inlet Cam Centerline | 110º ATDC | 110º ATDC | 110º ATDC | 110º ATDC | 100º ATDC | Exhaust Cam Centerline | 105º BTDC | 105º BTDC | 105º BTDC | 105º BTDC | 110º BTDC |