Some years ago while visiting Barney Gaylord's garage I happened across this handy little tool. It's the Hoppy Headlamp Adjuster (Pat Pending) by the Hopkins Manufacturing Corp of Emporia Kansas. This was manufactured in 1982 back when sealed beam headlights were more common. Finding information about this unit has been tough. In fact it took me years of trying different keywords on eBay to find it. Part of the problem is that it has no model number marked on it and most searches are flooded with more modern tools. Since the units manufacture, Hopkins Manufacturing has moved on to far more sophisticated headlamp adjustment tools (as has the rest of the world). No new car has had headlights compatible with this handy gadget since the mid 90's. They come up on eBay from time to time for 10 bucks or less (shipping included).
As it turns out the patent was granted July 24, 1984. It's patent number 4,461,090. According to US Patent Office records, the patent expired July 24, 1996 due to unpaid maintenance fees. That makes sense because by that time Hopkins had already created a sophisticated new system that used lasers, and carmakers had largely abandoned sealed beam headlights.
The inventor was Evan Lloyd "Bud" Hopkins who was born in Emporia Kansas in 1916, apparently lived there his whole life, married, had two kids, and died April 1, 1999. He and his company were granted at least 30 patents from the 1950s up until his death.
Basically this headlamp adjuster is a bubble level that fits against some adjustment pads molded into the headlight lens. This allows the user to level the headlamps properly and with a fair degree of accuracy (in theory anyway). Here are the instructions that appear on the back of the package (click for larger view).
If you've glanced at the patent document, you may have noticed from the drawings that there were two available styles. There was, one for rectangular headlamps, and one for round. Both reached production. Here is the rectangular type
Obviously, the one you want is for round headlights. Here are more images of the unit in its packaging (click for larger images).
Now in the real world this unit is a bit more difficult to use properly than it looks. This is a 30-year-old plastic tool after all, and one that isn't used all that often. There are some moving parts that may need some persuasion. On mine, I couldn't get the legs to extend to fit the 7" headlights on the midget without using a pocketknife to guide one warped part over a ridge somewhere (long story). If you have some mechanical sympathy it can be made to work. One nice feature is that the instructions are always molded onto the unit in case you forget or lose the packaging. Once I had adjusted and calibrated the unit, I noticed that the legs were pretty flexible, which meant that pressing the adjuster against the headlight too hard could result in false readings (would've been nice if this baby was aluminum). Only use it to check the headlight after making adjustments, NOT while making adjustments (that way you can constantly check and double check the calibration at the same time). I also found the bubble level calibration mechanism somewhat sticky and difficult to operate precisely.
On spridgets you start by removing the chrome trim ring on the headlights as per your owners manual's instructions. Some of them have a retaining screw on the bottom, others just snap on. This exposes the adjustment screws. This tool only helps with the vertical adjustment, so start by making sure that the headlights are pointing straight ahead and then check the vertical alignment with the Hoppy Headlamp Adjuster. In a few minutes you'll have it all set up right. Despite its inadequacies, it's a neat little tool to have and the price is right.
