The Lockheed calipers used on spridgets are of a two piston design with a piston on either side of the disc (which also holds the pads in place), and are bolted directly to the sub axle. This differs from the now near universal, single piston design that features a caliper that floats in and out on a pair of slides mounted to a bracket that also holds the pads. Even two piston calipers these days are likely to incorparate slides. Replacing pads on these cars is quite different. Cars that came with disc brakes from the Abbingdon assembly plant (Oct 1962 on) are serviced in the following way. You will need.
- Lugwrench
- 10" Curved Jaw Vise-Grips
- Jack
- Flat Bladed Screwdriver
- Brake Pads
- New Brake Pad Retainer (recommended but not required)
Begin by loosening the lugnuts and then jack up teh front of the car. Take the front wheels off. All you need to do next is pull out two spilt pins on the rear of the calipers. If the pins are in the "wrong" direction you will have to pull them inward towards the center of the car and maneuver the upper pin around the brake hose. Otherwise they should pull straight out away from the car.
Once the pins are out, remove the spring retainer. Next use the vise grips to retract the pistons as shown so that you can more easily remove the pads. As you press one piston in, the piston on the other side has a tendency to come out some, so keep that in mind.
Now remove the old pads. The ones I used were "classic gold" brand purchased through World Wide Auto Parts. These have an anti squeel pad on the back.
Next insert the pads and replace the spring retainer. This has to be compressed while inserting the split pins. You can press the spring with your fingers but sometimes a flathead screwdriver prying against the caliper is more effective. This is the most difficult part of the whole process.
Next, put the wheels back on, lower the car back onto its wheels and follow the bed in proceedure for brake pads (offsite). Be aware that since yo retracted the pistons, you need to pump the brakes before going anywhere.