Few if any manuals explain exactly how to diasemble the parking brake system on these cars. A possible sorce of confusion and frustration is what some have called "the swivel part the cable connects to and pulls the 2 rods to engage". I am referring to the part shown below in Michael Butler's excellent photo.

This is what is called the balence lever. Lets take a closer look using the diagram from the service parts list and examine how it all goes together. This assembly can be confusing for some at first glance.
- Clevis Pins (also 37)
- Washer
- Balence Lever Support (part number ATA 7320)
- 5/16" Zinc plated U.N.F. bolt, 3/4" in length. (2 req)
- plain flat 5/16" washer (2 req)
- 5/16" Spring washer aka lock washer. (2 req)
- zinc plated 5/16" U.N.F nut (2 req)
- Balence Lever Carrier (part number 2A 7058)
- Balence Lever
- Felt washers (also 38)
- Balence lever lubricator aka zerk aka grease nipple.
Now that we have the terminology out of the way and have a decent idea of what we're looking at, let me better explain how it all goes together. The balence lever is theraded on the inside. The balence lever carrier simply threads into the balence lever. The balence lever support has a threaded stud which threads into the hole in the balence lever carrier. The lubricator (or zerk) threads into the top of the balence lever. Its actually very simple to assemble and as long as it has been properly greased it should not need to be disassembled.
Here's where things get interesting. The only way to remove the balence lever is to unscrew the carrier from the support because of the tab the cable attaches to. Once the support and the carrier are separated all you have to do is unscrew the carrier from the lever. Since the lever should be regularly greased, this part is easy. Unfortunately, the balence lever carrier can rust to the balence lever support so badly that you may not be able to separate the twop without destroying them.
I should also note that Moss calls the carrier a trunion and sells it as part number 182-720 for about 10 bucks, and the lever support as part number 331-666 for about 75 bucks. The lever itself is no longer availible. It is therfore preferable to destroy the carrier than risk destroying the support. However, it should be noted that it is undesirebale for the carrier to turn freely on the support and if the balence lever turns freely on the carrier, all that should be done is a simple cleaning and greasing of this assembly.