Starting with G-AN4-58112 and H-AN9-70268 spridgets came equipped with reverse lights. The transmission remote casting was modified to include a switch opposite the reverse selector detent plug as shown in the pictures below. The two different castings are interchangeable. In this way an earlier ribcase transmission can be fitted with a reverse light switch by fitting a later style remote. The unit in the top of the pictures has the reverse light switch, and the one bottom does not.
![]() | ![]() |
Changing remotes is simple. There is no risc of losing detent balls, or any need to worry about shims or anything. Its the simplest thing you can do with your gearbox. It is also important to note how the wiring sub harness is routed down teh side of the gearbox. Metal straps that bolt to the gearbox hold the wiring in place untill it joins with the main harness. See image below (courtesy of Norm Kerr).
Here is a top view showing how to route the wires on a transmission equipped with the neutral switch (used on cars with seatbelt warning buzzers/lights 72-74). Photo courtesy Andrew Hardie

