Datsun B210 Transmission: How to check/fill Oil

 

As with the stock A-Series RWD gearbox originally supplied with pre 1500 spridgetrs (948cc, 1098cc, and 1275cc) there is no dipstick for the Datsun B210 gearbox used in the Rivergate and Morrisservice 5 speed conversions. Also, unlike in the transmission that came with the car, the proper oil is simply 75w90 wt non synthetic gear oil. DO NOT use engine oil of any kind. Its simply too thin. Your transmission will wear out faster if you use engine oil. The filler plug is located on the left side of the car between the front of the bell housing and the rear extension of the gearbox (aka transmission). The drain plug is located just aft of the rear extension flange. The filler plugdoes not line up with the access plug previously used for this purpose. However the drain and filler plugs are easily accessed from under the car as shown. The filler plug is circled in red, the drain plug in green, and just in case you were wondering, that thing circled in yellow is the starter motor (some rivergate kts left that hanging in the breeze).

The oil needs to be filled up to the level of the bottom of the hole. When it starts spilling out of the filler hole, its full. If you stick your finger in the filler hole and don't feel any oil, you should add some. Total capacity is about 2.5 quarts.