I thought it might be useful to take a brief look at the inside of a canister type oil filter, and how it works.
As you can se in the animated gif above, inside the filter housing is the filter media (usually paper) which is pleated and wrapped around a metal core. On top you can see a spring that presses the filter against the base, and sometimes there is also a pressure relief valve. This valve opens to allow oil to bypass the filter when the filter becomes clogged, as it is better for dirty oil to pass through the engine, than no oil at all. Different filters have different strength springs in this valve, so it can open at a pressure that suits your vehicles needs. A valve with too weak a spring may open too easily when you use the 20W50 oils most spridgets require. A valve with too strong a spring, may not open when it should.
Between the base and the filter is where you can sometimes find an anti drainback valve. In this case, its little more than a rubber ring that is fixed at the middle and allows oil to flow only one way through the filter, thus preventing oil from draining back through the filter.