British Leyland fender badge Info

 

With the facelift for the 1970 model year, came the addition of two small badges on the fenders showing the world that the MG Midget and Austin Healey Sprite (soon "Austin Sprite") were manufactured by British Leyland (located at the lower rear corner of the fender or wing). The first badges were part number CZH 657 and had two posts on the back that pressed into some clips (13H 217) placed in two holes in the fender (see TA0023 for placement). This badge looked like the one below. Moss sells a reproduction as part number 470-687 but it is self adhesive backed without the two posts.

Front
Back

As many of you are aware, British Leyland had a great deal of trouble turning a profit, and were aloways looking for ways to cut costs. Famos examples of this include the ending of liscencing agreements with John Cooper and the healeys which in turn spelled the end of the Mini Cooper, and the Austin-healey brand respectively. In this case, for probibly the same reason, British Leyland switched to a badge that was held on with two strips of double sided tape, and thus eliminated the need to drill two holes in the fenders. Furthermore, only 1 badge was installed on one side only. This fact is confirmed by multiple sources including factory parts lists, Terry Horler's Original Sprite and Midget, and numerous vintage ads and brochures. This happened in April 1972 with car number GAN5/118599. The new part number was CZH 2717. It looked like this.

Front
Back

The really curious thing is that it is nearly impossible to determine just which fender (wing) they put it on. It is clear from factory photos that it is roughly the same spot as the old one, but brochures and ads don't always show both sides of the same car. Some shots dont show any badge, some shots show two cars with badges on opposite sides. It looks like most of the time it was on the right side of the car (corresponding to RHD drivers side), but occasionally it is seen on the left. It also seems that the closer you get to April 1972 the more confusion there is as to which fender it goes on. Here are some clips of ads from 1973.

The 1974 brochure even shows an example of a left badged and a right badged car in the same shot!

Interestingly enough, Moss Motors lists this newer style badge as 470-686 and says that you will need 2 (one for each fender). While I would think it would look better with two, those who are concerned about originality should only order 1.