Ribcase Shifter Linkage 101

 

This is a brief explanation of how the shifter in a ribcase gearbox works. A smoothcase will work much the same way. First lets take a look at the parts list pages and see an exploded view of the parts and a what the factory called them.

Your shift lever fits into a remote control unit that bolts onto the tail extension. There is a ball and socket joint connecting the shift lever to the rear selector lever (#19 in the diagram) on the remote control shaft (#22 in the diagram). At the other end of the shaft is the front selector lever (#12) in the diagram which features a nother ball and socket joint connecting it to the control lever (#7 in the diagram). There is a plastic bushing in this joint (#13 in the diagram) which is very important for a solid feel to the shifter. If it's missing, shifting becomes a bit difficult and feels sloppy. This control lever is what ultimatly moves into the slot on the selector rod and moves the selector rod forward and backward.

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

There is also a plunger below and to the right of the shifter which prevents the driver from accidentally shifting into reverse (click to enlarge).

Neutral
Reverse

Bact to the selector rods. The rods you saw being moved forward and backward are connected to selector forks. These forks move sliding hubs or in the case of reverse and 1rst gear they move the gear itself into or out of position.

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player