Water Pump Bypass Hose

 

On A-series engines there is a small little hose that connects the water pump directly to the cylinder head effectively bypassing the radiator when the thermostat is closed. This hose is notoriously hard to replace without either removing the cylinder head or the water pump. Early images from factory sales literature (such as this one for a bugeye sprite) show an accordion style collapsable hose which may be more easily installed.

I used this hose in my engine rebulild back in 2009 or 2010 4 or 5 years later this hose failed on me along a moulding seam as shown in the following picture.

Its also apparent that the pleats have weakened and the whole hose has balooned out somewhat.

Others on the MG Experience forum have commented that they have had similar issues with this style of hose. Tellingly, this hose cannot be found in any BMC or BLMC or BLL parts listing from 1968 onwards. It seems the problem with the recent run of hoses is that they arent reinforced like some of the early ones, and of course they are possibly more expensive to manufacture properly than just standard heater hose. I did find an ebay listing for a bypass hose from the late 1970's or early 1980's judging from the logo on the package. Guess what. Its not accordion style! Seems to me that even the dealers had issues with the accordion style hoses and were issuing just short lengths of standard heater hose (click to enlarge).

A short length of heater hose is more reliable than the accordion type you might find through either moss or victoria british. Not only that, but you can get it from any car parts store. Its such a short length that some places may even give you it for free. The only trouble is installing it. The easiest way will be to remove either the head or the water pump. It is possible to install this type without doung that, but not easy. I'd recommend getting a new water pump gasket and removing the water pump since that way you arent disturbing the head gasket. Water pump gaskets are cheaper than head gaskets. Use the accordion type for emergencies only.