SOme cars came with a vacuum port on the side of the front carburettor. Other cars did not. If you want to switch to a ported vacuum instead of manifold vacuum, here is how you can do it. First lets look at the plans. These were given to me by Alan Anstead. Thanks! Click to enlarge.
Basically take a 3/64" drill bit and drill in the spot indicated on the plans, then enlarge the bore for half of it's length so you can press in a tube or fitting to make the connection to the vac advance pipe. A pin vise can be a great way to get this hole started as it allows you to very presicely place the hole and ensur eit goes in straight. After it became clear I wasnt making much progress anymore, I was able to put the bit in a corded drill. The hole is very small, and the bit does get clogged up with aluminum shavings from time to time, so clean the bit every so often.
