Aldon "Yellow" Distributor

 

Some years ago I purchased a special tuning parts catalogue for the MG midget off of ebay. This was a xeroxed copy of a catalogue British leyland issued long ago. I looked through it and was able to determine that basically the "stage 2" tuning would still be doable and would have a worthwhile increase in performance. I started looking up the part numbers in google. As it turns out the distributor they used back then is still available!

It was listed as a Lucas 41110 (part number C-27H 7766). A quick google search revealed that C-27H7766 is a part number still used by SpridgetMania.com (Formerly MiniMania's Sprite and Midget section), as well as minispares.com, and minimania.com. The part listed there is an Aldon Yellow 100AYV. Aldon Automotive is well known for their recurved and rebuilt distributors. I can't be certain if they made dizzys for British Leyland's tuning department, but the connection is there in at least three parts catalogues and even on a few forums. I decided to save my pennies and get one someday. Now that the engine is rebuilt, I figured it was a good time to get one of these and put it in.

According to Daniel Stapleton, any time you change the cam, port the head, install larger valves or anything else hat changes the length of time for the air/fuel mixture to be introduced into the cylinder and burnt, its a good idea to consider changing advance curves and even changing the dwell time of the distributor. Just for reference, other distributors that can work are made by Mallory (either with dual mechanical points or optical), and in times past a company called Microdynamics seems to have manufactured a modified 45D that may be very similar to the Aldon Yellow.

This is what the box it comes in looks like. I ordered it directly from Aldon in england to save some money (you can get these through APT Fast but they charge a lot more). Shipping took less than 2 weeks.

 

 

 

 

 

 

Inside that box is a smaller green one and inside that, is the distributor with some packing foam blocks to protect it. The distributor fits somewhat loose inside the foam but there didn't seem to be any damage after its long voyage from England to Illinois.

The distributor that Aldon starts with is not the same model that came stock in my 1971 MG Midget. From the factory it would have had a 25 D distributor. Earlier cars had yet another model number, but Aldon starts with a 45D unless possibly if you ask them to recurve your own stock distributor.
One of the main advantages of the 45D over the other Lucas distributors is that the clamping forces are against a solid piece of aluminum unlike on the 25D with has an all too easily crushed ring. Still I wont over tighten this when I do install it.

The overall shape is slightly different too. The vacuum unit dopes not have the vacuum port on the end, instead it is off to the side a bit. Unlike the 25D there is no external adjuster for fine tuning the timing. The low tension lead has a long wire ending in a spade connector whereas on the 25D there is a spade connector riveted to a plastic block that slides into the side of the unit. The cap retaining clips are much shorter and the cap is of a different type with all the leads coming straight out the top. Still, I think it looks more or less stock and if Aldon, hadn't labeled it with a sticker, and engraved it with a model and production date, it would look like any other Lucas 45D

One alternative to the 100AYV is the 100AYSV which comes with a distributor that has all the leads coming off the side instead of the top. This is an extra £10 over the standard unit however and not worth the expense in my opinion. However I have been told that the side entry cap may be necessary in RHD cars (I think as long as you have angled connectors on your wires you should be fine. The caps are interchangeable and the side entry cap is manufactured especially for Aldon and as such is available ONLY through them.

Under the cap are some more differences. There is a felt pad that wipes against the center cam. I initially thought this was to keep the cam clean but I have been told that this should be oiled to prevent premature wear of the points cam follower. This particular model is equipped with points but they can be ordered with electronic ignition preinstalled. Also unlike the 25D, the vacuum unit does not hook on to a post accessible from the top, but instead is hidden underneath a plate.

An old friend who is sometimes but not always correct told me that the wider body and greater distance between the contacts in the cap reduce carbon tracking and allow higher voltages than the 25D. The special tuning manual makes no mention of a higher rated coil, so I suspect that it may be unnecessary to do so. The cam itself is a bit interesting too. I don't know if this was Aldon's doing or not but the cam seems to be designed to keep the points open a bit longer than on a standard 25d. the noses are all flattened a bit and keep the points open for roughly 40º - 45º.

Tune Up Parts are available from:

Mossmotors.com
Victoria British
APT Fast
Aldon Automotive
NAPA
Autozone
MiniMania
Se7en Enterprises
and many others. . .

One final note on using this distributor. I'm sure some of you are wondering how you can get replacement distributor caps, rotors, points etc. I assure you that the 45D does not show up in any standard sprite or midget catalogue and would only show up as a spridget part in performance oriented catlogues. However, the cap used on the 45D was used on lots of 4 cylinder cars from that era. I asked Aldon Automotive for the part number and they told me it is Lucas part number DDB108. This cap was used on Lucas 43D, 45D, and 59D distributors. You can find it by simply looking up the distributor cap for MGBs from 1974-1976, 1500cc MG Midgets, 1500cc triumph spitfires, minis after 1974, Land Rover series 3, Triumph TR7s or many others I'm not aware of yet.

Aldon Automotive Included a static timing sheet. you can see it here (AldonInfo.pdf).

Overall I am impressed with this piece so far. The shaft feels nice and solid in its bushings with no play in any direction, yet the shaft rotates with ease. I will have to install it and see what happens.

Overall I am impressed with this piece so far. The shaft feels nice and solid in its bushings with no play in any direction, yet the shaft rotates with ease. I will have to install it and see what happens.

~Seth Jones

see part 2 here

Tune up parts list for this distributor