Kangol's first self retracting seat belts seem to have been manufactured about 1968, and used the same magnetic buckles found on their staic belts. These belts were known as Kangol Reflex belts. They were fitted to some Austin sedans, the MGB and MGC GT, Triumph Stag and other cars, but not the Midget or Sprite.
Here is an article announcing the launch of this seatbelt from 1967 or 1968 along with some ads (the one on the far right was found in the October 1968 issue of Car Magazine.
![]() |
![]() |
![]() |
Kangol Magnet Ltd. filed US patent number 3508720 on March 18, 1968. I believe it is this patent that is primarilly behind the Kangol Reflex belts, especially since one of the patent drawings is a extremely close match to the illustration in the leftmost article above.
Spridgets finally recieved retracting belts some 5 years later for the 1973 model year. By that point kangol had abandoned the magnetic belt in favor of a more modern push button arrangement having released the Euroflex belt system either slightly earlier or about the same time. The ones fitted to MG midgets may have even been Euroflex belts, but I have yet to confirm this. I do know that there were several series of Euroflex belts made (reaching Euroflex V by 1980).
On these particular belts, the only visible markings are on the underside of the push button buckle. What it says is found in the box below.
By KANGOL MAGNETIC LIMITED British Patent No 1231 364 Part No. D60217 |
The Inertia reels were covered in a thick plastic, as were the receivers. This plastic was probably quite flexible originally, but has hardened and cracked by now. I presume this is a common problem with these belts. As with the Kangol magnetic lift flap belts, one should always have these re-webbed before use as the webbing loses strength with age. Presumably the change was made to satisfy changing safety regulations in the US market since the use of the new belts also included a seatbelt warning buzzer switch. My set only had it on the driver side belt.
According to the British Intellectual Property Office the patent was filed June 17, 1969, published in May 12, 1971, renewed May 20, 1988, and expired in 2008. I was able to determine that this was also published as US patent 3494007, and was published Feb 10, 1970. It is a patent for the buckle and nothing else. Joseph E. Dahms assignor to the American Safety Equipment Corporation filed the patent, which would explain why the buckle was manufactured under liscence.
Last updated 11/17/2011 by Seth Jones


